Dunlop CRYBABY Signature Series - KH95 Kirk Hammett WAH-EA Pedal

Kirk Hammett Signature Cry Baby® Wah Wah

KH95

    Kirk Hammett's legendary wah-wah tone
    Thick top end and full dynamic range
    Kirk Hammett inspired graphics and tread

Now you can command the same killer wah tone as Kirk with the new Kirk Hammett Signature Wah. Developed in close collaboration with the metal guitar icon himself, it has been meticulously tuned and tweaked to deliver the wah-wah sound that revolutionized metal solos in the '80s and for all time to come. This is the legendary tone that Kirk dials in on tour, using his DCR1SR Cry Baby Rack Wah. Dunlop's engineers took Kirk's EQ, volume and tone settings—reflecting decades of blazing Cry Baby riffology—and reproduced them with exacting precision. The Kirk Hammett Wah is exceptionally even in response as you move from heel to toe, with a thick top end and full dynamic range. Dare to step into the footprint of a giant. Own a piece of the legend: the Kirk Hammett Signature Wah from Dunlop.

Power: Dunlop ECB003 AC Adapter or Single 9 volt battery

POWER

The Kirk Hammett Signature Cry Baby® Wah Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), an AC adapter such as the Dunlop ECB003/ ECB003E, or a DC Brick™ power supply.


SETUP INSTRUCTIONS

• Run a shielded instrument cable from your guitar to the KH95’s INSTRUMENT jack.

• Run another shielded instrument cable from the KH95’s AMPLIFIER jack into your amplifier input.

• Turn on the amplifier and begin playing.

• To turn the pedal on/off, push the toe of the pedal down until you feel a “click”.

• By rocking your foot back and forth on the pedal, you can change the effect that the Cry Baby has on the tone of your instrument instantaneously.


SPECIFICATIONS

Impedance

Input 680 kΩ

Output 4.7 kΩ

Filter Parameter

Low Pass 300 Hz to 380 Hz

High Pass 1.4 kHz to 1.8 kHz

Maximum Level

Input -13.5 dBV

Output +6.5 dBV

Maximum Gain

Heel Down +17 dB at 300 Hz to 380 Hz

Toe Down +21 dB at 1.4 kHz to 1.8 kHz

Noise Floor*

Heel Down >95 dBV

Toe Down >89 dBV

Bypass Hardwire

Current Draw4 mA

Power Suppy 9 volts DC